Fishing articles, local fishing reports, product reviews, some local tournament schedules and results, links to other sites, photos, fun fishing trips with friends, and other information written by myself and selected individuals. Focus is on largemouth, smallmouth, and spotted bass with other freshwater species occasionally mentioned.

Wednesday, June 23, 2010
Fort Loudon Fishing Report - 6/22/10
The lures we used were shakey heads, jigs, deep diving crankbaits, and even a few topwaters in the shady areas.
We didn't catch many fish, but the ones we did catch were quality. We managed 4 fish with 3 being keepers. One largemouth was 2.5 lb, one was 3+ lb and one was a 4+ lb smallmouth. I also caught a big drum on a jig.
I considered it a decent day given the tough, miserably hot conditions. We caught a few good fish and were able to get away from work for awhile. If I went out right now in the same conditions and fished the same area, I would definitely focus on the jig and the topwater.
Wednesday, April 7, 2010
Fort Loudon Fishing Report - Week of 4/4/10
Currently, the baits being used most frequently are jerkbaits, crankbaits, spinnerbaits, and Texas rigged plastics or jigs. The fish are on points and warm banks where they can be caught with any of the above lures. It's not uncommon to catch several fish in the same spot.
Anglers, including myself, are also catching some large striped bass (aka stripers or rockfish) on these lures with 10-15 pounders being common.
Saturday, July 25, 2009
Trouble Finding Quality Fish
I have developed a few strategies for my next few tournaments based on my thoughts about what the fish are doing. First, I will try the run and gun approach. Based on my experiences with the keepers being scattered with one here and one there, I believe if I hit enough points, bluffs, and humps I can get my limit. In doing this, I will probably fan cast each spot with a deep diving crankbait, Carolina rig, and football jig, in that order. I will also have a fluke tied on and ready to grab for the schoolers that tend to frenzy in these areas.
Second, I may stay in very deep water for my lake (50 feet) and chase the schooling fish that seem to keep appearing in these deep areas. I would be using a fluke, popper, walker, and crankbait to target these fish. The only problem with this is the catch to keeper ratio. One can catch many fish doing this, but most of them are small. However, when the schools of big fish appear, the livewell can fill up in just minutes. To me, this seems like a boom or bust approach.
The last approach I am considering is to target just 4 or 5 areas where I have caught some bigger fish recently and probe every inch of them. For some reason, these areas have not produced lately even though the weather has been consistent. In fact, the only difference is the lake has been dropped between one and two feet. Maybe, I will move out a little deeper and fish really slow. If I decide on this strategy I will be using Carolina rigs, Texas rigs, and heavy jigs. The plastics used will vary from lizards to straight worms. I've not had one particular lure stand out on the Carolina rig or Texas rig this year. It seems like as long as it is some hue of green or pumpkin, they will bite it.
I'm very determined to find these larger fish during these hot months. I fish well in the Spring, Fall, and early Summer. Mid to Late Summer baffles me. I will find the fish! I will succeed! No matter if you love or hate Michael Iaconnelli, his "Never give up!" slogan is a great one. If I do fail, I will continue my Summer pursuit next year. After all, I'm still young.....just impatient!
Any suggestions you may have are encouraged and greatly appreciated!
Saturday, January 31, 2009
How To Make A Jig
Wednesday, January 28, 2009
Tournament Preparation
Most of the pros talk about studying lake maps, calling local tackle shops and doing internet research to prepare for their upcoming season. That's fine because they fish many different lakes all over the country. However, to me this information is kind of useless because I only fish 3 or 4 lakes a year. As a matter of fact, most of the anglers I know only fish a few lakes a year. More... We have become familiar enough with these lakes to eliminate map study and such. If you are fishing a lake for the first time, by all means, get a map and use it for as long as you feel you need it. I used maps of the lakes I fish for a couple years until I felt comfortable without them. Having said that, I would like to talk about some things to prepare you for the tournament season that would apply to both amateur and professional anglers.
The most important thing in preparing for tournaments is making sure your gear is in good shape, especially your boat, rods and reels. Following is a list of things I do to make sure they are in good working condition. I continue to do this several times a year due to the frequency of use.
Rods:
- Check for any hairline fractures. A broken rod is a useless one.
- Make sure your cork is in good shape.
- Check all guides and tip. Run a cotton ball through them and if it snags, you need to sand down or replace the guide. Snags lead to broken line.
- Clean rod and eyes to remove any dirt.
Reels:
- Remove all old line.
- Clean exterior with a good product designed for reels. I like Ardent products.
- Take apart and completely clean insides.
- Grease the gears lightly, don't gum them up.
- Lightly oil any moving parts such as handles, spools, roller balls.
- On baitcasters, make sure the line guide is smooth and clean any dirt out of it.
- Put new line on all reels. Write down what line you have on each reel so if you don't like the setup, you'll know not to use it again.
The other equipment you need to prepare is your lures. Here are some of the things I do.
Crankbaits:
- Touch up any paint you feel is necessary. I do this on some baits, but mostly I like them beat up and rough looking.
- On heavily used baits, change the hooks. I prefer Owners on lipped crankbaits, and Mustad Triple Grip on lipless. I change factory hooks on everything except Lucky Craft.
- Make sure the split rings aren't bent.
- Sand the diving lip if it's beat up. This will help it dive.
Spinnerbaits, Buzzbaits and Jigs:
- Sort by size
- Sort by color
- Sharpen hooks
Plastics:
- This may sound silly, but make sure they haven't melted in storage before you throw them in your bag.
- Arrange them so they are easy for you to find. A previous article recommends using a cake pan that you can get at WalMart or Target and it works great. I carry about 50 plastic bait bags in one of these.
- If you have several bags of particular bait, consolidate them into one to save space.
Lure Storage:
I used to be a lure fanatic. I would buy everything just to try it. Those days are gone! I try new lures occassionaly, but I mostly know what works well where I fish and what I am comfortable with. Here is what I carry for lure storage in my boat to tournaments.
- A Shimano bag that holds four boxes in it and has a front pocket, 2 side pockets, and a zipper pocket in back. In the boxes I have one for spinnerbaits and buzzbaits, one for flipping jigs, one for football jigs, and one for smaller buzzbaits, inline spinners, hair jigs and bucktails. The side pockets hold extra blades, trailer hooks, sharpie markers and scent. The front pocket holds plastic trailers and pork trailers. Tha back zipper holds my caplight, scissors and pliers.
- Two Falcon hook utility boxes. One holds shakey heads, drop shots, and other finesse type hooks and sinkers. The other holds heavy hooks and sinkers for Carolina and Texas rigging.
- 2 Plano utility boxes. I like to make these season specific as far as colors and types of lures, but generally it is this. One for deep diving crankbaits. One for other crankbaits, topwaters, lipless crankbaits, jerkbaits.
- 1 cake pan for all my plastics.
So, to sum it up, I carry one bag, 4 utility boxes, and 1 cake pan. This really helps me decide what to use on the water by limiting my choices to only the lures I am comfortable with and I know work.
Last but not least, you need to make sure your boat, trolling motor, and electronics are in goodworking condition. I change my lower unit oil, start the boat in the driveway and let it idle for a few minutes. I also put it in and out of forward and reverse gear. Be sure to keep up with regular maintenance on your boat. I just turn my electronics and trolling motor on to make sure they're working after being stored for a couple months.
Everyone has their own preseason rituals which may or may not include things in this post. These are some of my practices, but I am a firm believer in doing whatever works best for you. Have a happy and safe tournament season!
Friday, January 23, 2009
Does Size Really Matter?
Best,
Dittmore